ADVERTORIAL

My husband has lifted our mattress over 2,000 times. I did the math on the back of a church bulletin.

Ten years of Saturday mornings, one very heavy pillow-top, and the weekend my sister changed her bed without asking anybody to lift anything.

Every Saturday, Walt lifts and I tuck

Every Saturday morning for ten years, my husband Walt has lifted the corners of our mattress so I can get the fitted sheet on.

It goes like this. Walt crouches at the foot of the bed, gets his hands under the corner and says, "Ready." He lifts. I tuck. He lets it down. Then we go round to the next one. By the time we get to the fourth corner, the first one has usually popped off again, and we go back.

We call the mattress the slab, because Walt says lifting it is like lifting a slab of steel. We bought it in 2016, a fourteen-inch pillow-top queen, because the salesman had us lie down on it and Walt said it was like sleeping on a cloud.

The salesman did not mention that you have to pick the cloud up once a week.

My name is Joyce. I'm 69, Walt is 72, and we live in a ranch house outside Toledo, Ohio. Walt worked thirty-one years at the glass plant. I was a teller at the credit union for twenty-eight, which is why I count things.

The math on the back of the bulletin

One Saturday this spring, Walt sat down on the edge of the bed between the third corner and the fourth. "Just for a minute," he said.

While he sat, I took the church bulletin out of my purse and a pencil off the nightstand, and I did the math in the margin. Fifty-two Saturdays a year. Four corners. Ten years. We traveled a few times here and there, and I was sick a few times as well.

It still came to over 2,000 times my husband has lifted the slab, not counting the corners that popped off and had to be done twice. I didn't count those. I'm not cruel.

I showed him. He looked at it for a while.

"I'd have said more," he said.

Then he stood up and went to the fourth corner. "The slab's gotten heavier this year," he said.

"It's the same slab, Walt."

He didn't answer that. He lifted, and I tucked.

Everything we tried

It wasn't for lack of trying. Over ten years we tried just about everything except a different mattress, and we weren't getting a different mattress. The slab is comfortable. That was never the problem.

We tried the deep-pocket sheets from the store. The package said they fit mattresses up to eighteen inches deep. They went on fine on Saturday and came off by Tuesday, one corner at a time.

We tried doing the two bottom corners first and walking the sheet up the bed, the way my niece showed me in a video on her phone. That works on a mattress you can lift with one hand.

I made hospital corners for a month, the way my mother did. They lasted until Walt rolled over.

We tried changing the bed every other week instead of every week. I lasted two weeks. I like a clean bed.

And once, Walt's idea, we stood the slab up on its side against the bedroom wall and tried to dress it standing up. We did that exactly once.

My sister changed her bed and nobody lifted anything

In June we drove over to my sister Marlene's in Fort Wayne for her birthday.

On Saturday morning she said she had to change her bed before the cousins came for lunch. Walt was already rolling up his sleeves. He followed her down the hall to lift.

"Sit down, Walt," Marlene said.

She went round the edge of the mattress with one hand, and I heard a zipper.

Then she lifted the whole top sheet off in one piece, flat, like taking a tablecloth off a table. She got a clean one out of the closet, laid it on the bed and zipped it back on, round the edge, the same way. She never touched the mattress.

Walt watched her like she was doing a card trick.

When she was done, he got down on one knee and looked at the zipper the way he used to look at a seam at the plant. He ran his thumb along it. Then he pulled the edge of the sheet back an inch. Underneath was a stretchy base wrapped round the mattress, snug as a fitted sheet, and the zipper ran along the edge where the top met the side.

"Where's the part you lift?" he said.

"That's the base. It stays on," Marlene said. "I take it off and wash it a few times a year."

"How many times a year?" I said.

"Three or four. When I turn the mattress anyway."

I still had the bulletin in my purse. I took it out and did the new math under the old math. It didn't take long.

Marlene wrote the name down for me on the back of the bulletin, under the math. ZipSheet, made by Pleene.

I wrote down three worries

I didn't order it that weekend. I don't buy things off the computer the same day I hear about them. When we got home, I read the whole page at the kitchen table, then I read it again, and then I slept on it.

The page didn't promise I'd never lift the mattress again, which I appreciated. It said a few times a year, to wash the base. I trust a page more when it tells me the part I won't like.

I had three worries, and I wrote them down, because that's what I do.

The first was the slab. Fourteen inches is a lot of mattress, and I'd been let down by eighteen-inch promises before. But with this one you don't measure the depth. You pick your mattress size, and the base stretches. The page says it fits deep pillow-tops. That's exactly what the slab is.

The second was Walt's. He only wanted to know one thing: whether he'd be sleeping on the zipper. It runs along the edge of the mattress, not underneath you. He said that was the right place for it.

The third was mine. Zippers break. Every winter coat I've owned has taught me that. On the Tuesday I called Marlene and asked her how hers was holding up.

"Joyce," she said. "It's a zipper. It zips."

She also said the trick is a spare sheet, one on the bed and one in the wash. So on the Wednesday I ordered the queen in gray, and a spare.

It cost more than sheets from the store. I did that math too, but I ordered it anyway.

See the sheet that zips on →

One last lift

It came the next week. The base goes on once, like a regular fitted sheet, so Walt did one last Saturday lift, for old times' sake. Four corners. The base stretched right round the slab, and I didn't have to tuck a thing. Then I laid the gray sheet on top and zipped it round. It took me a minute the first time, going round the corners.

Walt stood back and looked at it. "Well," he said. "That's the last one."

"Until the base needs washing," I said.

"I'll pencil it in."

Walt rolled his sleeves back down

The next Saturday, I unzipped the sheet, put it in the washer on its own and zipped the spare on. Walt came in at eight o'clock like always, rolled up his sleeves and stood at the foot of the bed.

"Ready," he said.

"We're done," I said.

He looked at the bed. He looked at me. He rolled his sleeves back down and went to make the coffee.

I've changed it every Saturday since. Unzip, wash, zip the spare on. I don't tuck anything, and Walt doesn't lift anything. The base hasn't moved off the slab. I check, because I'm the one who counts things.

The sheet came out of the dryer flat, with no elastic corners, and I folded it like a towel. I counted other people's money for twenty-eight years. I have never once folded a fitted sheet. Our linen closet has two shelves now: the old fitted sheets, balled up the way they always were, and a neat gray stack.

He still checks on it

It's been a few months now. Every Saturday at eight, Walt still wanders into the bedroom, stands at the corner of the slab and lifts it an inch. Then he puts it down.

"Walt. Leave the slab alone."

"I'm just checking on it," he says.

See the sheet that zips on →

A few things worth checking before you buy

What comes in the set?

The base and the zip-on sheet, both included. You can add a spare sheet, so one is on the bed while the other is in the wash.

Will it fit our mattress?

Pick your mattress size: Twin 39 × 75 in, Full 54 × 75 in, Queen 60 × 80 in, King 76 × 80 in or Cal King 72 × 84 in. The stretch base fits standard mattress depths, including deep pillow-tops, so you don't need to measure the depth.

How often will we lift the mattress?

Once, to put the base on. After that, only when you wash the base, which Pleene suggests every three to six months.

How do I wash it?

Unzip the sheet and wash it on its own. Tumble dry on low, or hang it to dry. The base goes in the washer too when it's due.

Will I feel the zipper?

It runs along the edge of the mattress, not underneath you.

Is it for everyone?

No. If your mattress is easy to lift and fitted sheets don't bother you, a regular sheet will do fine.

See if the ZipSheet is right for your bed

The Pleene ZipSheet™ is a fitted sheet with a zip-on top.

The base stays on the mattress, and the sheet you sleep on zips off for the wash. In six colors, Twin to Cal King.

See the sheet that zips on →

P.S. Pick your mattress size and get the spare sheet.

And keep your own bulletin. Walt says the number matters.

Joyce